How to Charge Fujifilm X-T50 and X-S20 Batteries
By Fujifilm House of Photography | Published: 2026-10-27
Category: How-to Guides
Learn the correct way to charge your Fujifilm X-T50 and X-S20 batteries using the BC-W126S charger, including tips to avoid common mistakes and extend battery life.
Quick Answer
Use the BC-W126S Battery Charger to recharge the NP-W126S battery packs inside your Fujifilm X-T50 or X-S20. Plug the charger into a wall outlet, insert the battery, and wait about 150 minutes for a full charge.
Why Use the Dedicated Charger?
Charging your camera battery with the BC-W126S is safer and more reliable than using a third-party charger or a USB cable (if your camera supports it). The BC-W126S is designed specifically for NP-W126S batteries used in X-T50 and X-S20, providing the correct voltage and current to prevent overheating or reduced battery life.
While the X-S20 can charge via USB-C in-camera, this method is slower and may not be convenient if you want to keep shooting while charging. The BC-W126S lets you charge a spare battery while using the camera, so you never miss a shot.
Common Charging Mistakes to Avoid
Many users accidentally damage their batteries by charging in extreme temperatures, using damaged cables, or leaving the battery on the charger for days. The BC-W126S has a charging time of approximately 150 minutes, so remove the battery once the indicator light turns green to avoid unnecessary wear.
Also, never force a battery into the charger. The NP-W126S battery has a specific orientation; if it doesn't slide in easily, check the alignment. Forcing it can damage the contacts.
Step-by-Step Charging Instructions
- 1. Prepare the Charger and Battery: Plug the BC-W126S charger into a standard wall outlet (AC 100–240V). The charger's power indicator should light up. Remove the NP-W126S battery from your X-T50 or X-S20. Make sure the charger is on a flat, non-flammable surface and away from water.
- 2. Insert the Battery Correctly: Slide the battery into the charger slot with the metal contacts facing down and aligned with the charger's pins. Push gently until it clicks into place. The charge indicator will turn orange to show charging has started. If the battery doesn't slide in easily, do not force it—check the orientation.
- 3. Wait for the Full Charge: Leave the battery in the charger for approximately 150 minutes. The indicator light will turn green when charging is complete. Remove the battery promptly to prevent trickle charging that can reduce battery lifespan. Do not leave the battery on the charger for more than a few hours after the light turns green.
- 4. Reinsert the Battery into Your Camera: Take the fully charged battery and slide it back into your X-T50 or X-S20 until the latch clicks. Turn on the camera and check the battery indicator to confirm a full charge. Store the charger and any spare batteries in a cool, dry place when not in use.
Products Referenced
- BC-W126S Battery Charger: The BC-W126S Battery Charger recharges the NP-W126S battery pack in approximately 150 minutes and operates on a wide range of input voltages (AC100V–240V, 50Hz/60Hz). This means you can use the same charger while traveling internationally without needing a voltage converter, and you can fully charge a drained battery in about two and a half hours.
BC-W126S Battery Charger - Fujifilm X-T50 Black: The Fujifilm X-T50 is a compact, dial-based camera weighing just 438g (0.96lb), following the design of the iconic X100VI. Its lightweight body makes it easy to carry a spare battery and the BC-W126S charger in your bag without adding much weight, so you can shoot longer on the go.
Fujifilm X-T50 Black - Fujifilm X-S20: The Fujifilm X-S20 is a compact and lightweight camera that disappears into your backpack when not in use. Its small footprint means you can easily pack the BC-W126S charger alongside the camera, ensuring you always have a way to recharge the battery during travel or outdoor shoots.
