How to Use the FUJINON GF 30mm F5.6 T/S Lens

Quick answer

The FUJINON GF 30mm F5.6 T/S gives you independent tilt and shift movements to correct perspective and extend depth of field. Use shift for straight building lines and tilt for landscape sharpness from near to far.

Step-by-step: Using the GF 30mm T/S

1. Mount and level the camera: Attach the lens to your GFX body and lock it onto a sturdy tripod. Level the camera horizontally using the built-in spirit level or your camera's electronic level. A level base is essential because tilt and shift work relative to the camera's orientation. If the camera is tilted, shift alone cannot fix converging lines.
2. Frame and focus with shift: Compose your scene normally, then use the shift knob to move the lens upward or sideways until the subject fits without tilting the camera. For a building, shift upward until the roofline is in the frame while the camera stays level. Check the edges for vignetting at maximum shift. Shift changes the composition, so reframe after adjusting.
3. Apply tilt for extended depth of field: Loosen the tilt lock and rotate the tilt knob to angle the lens forward or backward. For a landscape, tilt the lens downward so the plane of focus aligns with the ground. For a flat building facade, keep tilt at zero. Use live view at maximum magnification to confirm sharpness from foreground to background. Over-tilting can create a narrow band of focus; check the entire frame.
4. Lock and shoot: Tighten both the shift and tilt locks. Meter normally (the lens does not communicate aperture to the body, so use manual or aperture-priority mode). Use a remote release or self-timer to avoid vibration. Bracket exposure if the scene has high contrast. Always review the image at 100% on the rear screen before moving the tripod.

Lens used in this guide

• FUJINON GF 30mm F5.6 T/S: The uncompromising image quality, exacting colours and outstanding detail of GF Lenses moves to a specialist field with GF30mmF5.6 T/S. This wide-angle tilt-shift lens offers unprecedented control to produce distortion and aberration-free images of buildings, interiors, landscapes and more. You get the same GFX colour and sharpness while correcting perspective in-camera, saving hours of correction in post.